61A
MIC-IoT Conference System Host
DN20MS

●Adopt full digital conference technology, in line with IEC60914 international standard;

●Developed based on digital network architecture with built-in high-performance CPU processor for faster processing speed and better sound quality;

●The system host can set IP address and adopt advanced TCP/IP grid-based connection between the control PC and the host, such as WIFI access to the grid, so that the PC and the host can be controlled and managed wirelessly to realize distributed application and management;

●Multiple conference hosts can be used as separate conference systems, or can be easily expanded to form a large conference system for flexible multi-room configuration;

●AoIP interface transmits audio signals over the network with low latency and high efficiency to realize real-time audio interconnection in large meetings or multiple meeting rooms, and supports mainstream network audio protocols;

●Supports Power over Ethernet (POE), combined "signal" and "power" transmission.

●Ring handheld connection technology, failure or replacement of one microphone will not affect the normal operation of other microphones in the system, making the system more reliable;

●Support line "hot plugging", no need to power off during the meeting, can add microphone access to the system at any time;

●With the camera tracking host, the camera can be automatically tracked using computer presets and supports preset panoramic positions;

●Adjustable directivity with the microphone, supporting five polar patterns: Omni-directional, Wide cardioid, Cardioid, Super Cardioid, Figure 8, etc.

●Analog signal backup output can be switched to analog output when the network is disconnected or disconnected, ensuring smooth progress of the meeting;

●If POE power supply is insufficient, external power supply and extension power supply are available.;

●ID Setting Management;

●The metal housing, line and housing are reinforced with ground connection to ensure that it has the ability to resist static electricity 8500V;

●Optional external 4-inch wall control touch screen for conference host management and settings, convenient and effective, while displaying the following information;

a: Four modes of speech: Normal mode, FIFO mode, Free mode, Apply mode.

b: Speaking mode limit function: the number of speaking units 1, 2, 4, 6 adjustable, the chairman of the unit and VIP units are not limited.

c: System volume adjustment, high and low sound adjustment.

●Connected to a computer with the system control software, with more functions;

a: Centralized microphone management, such as microphone gain adjustment, forced on/off, and speaker information registration.

b: Check-in function can be initiated.

c: Check the microphone line condition.

d: VIP unit can be set through the software, the VIP unit switch is not limited by the number of simultaneously open conference units and speaking mode.

Power input

 POE+, AC100-240V

Audio output mode

 AoIP 6.35 balanced output

Mic Input

 RJ45

Connection

 hand-held, support ring connection

Control (RJ45)

 TCP/IP

Static power consumption

 External power supply 4W, POE power supply 8W.

Frequency response

 20Hz-20kHz

Wall control screen interface

 voltage 24V, distance≦100M

POE

10BASE-T:Category 3, 4, 5 unshielded twisted pair (≤100m). 100BASE-TX:Category 5 and above unshielded twisted pair (≤100m).

POE standard

 IEEE 802.3af, IEEE 802.3at

POE power

 60W non-isolated

AoIP

 2-channel, plug-and-play, auto-discovery device

Speed

 100M/1000M bps

Sampling rate

 48K

Heat dissipation

 Natural convection heat dissipation

Signal-to-noise ratio (S/N)

 >80dB

Harmonic distortion

 <0.5%

Weight

 3.5Kg

Dimension

 430x235x44mm

Color

 Black